DIGITAL CATALOG
INSTALLATION MANUAL
You always have the option to install PermShield yourself. The angle tap locking system allows for easy, low-prep installation over most existing floors. Our Installation Manual will help you get it just right.
MOLDING AND TRIMS
Room dividers, two-surface transitions, PermShield offers perfect colors match transitions molding accessories to help your new floor look, in a word, finished.
T-Molding is used to transition two floors of the same height typically installed between rooms or in entryways.
Reducer is used to transition floors of unequal height from wood/laminate floors to carpet, vinyl or tiles. This molding will provide a seamless look when transitioning between flooring surfaces.
End Caps are used for transitions to Carpet, Masonry (Fireplaces), Sliding Doors and other exterior Door Jambs.
Stair Nosing is designed for installation on the edge of a stair tread. Stair nosing adds beauty to your home while absorbing much of the staircase traffic. Coordinates with vinyl flooring, trim and moldings.
CERTIFICATIONS & WARRANTY
We stand behind the quality and safety of all our products, as part of our commitment to our core values of honesty, integrity and passion. Our vinyl products undergo rigorous performance testing and are held to stringent material health standards. Get peace of mind with an investment you can feel confident in and a beautiful floor you can feel proud of living on for years to come.
CARE AND MAINTENANCE
How to clean and maintain LVT?
As much as it sounds like a chore, it’s extremely easy to do and highly beneficial in prolonging the lifespan of your vinyl and maintaining its good looks. This way you avoid dirt and dust accumulating and being tracked everywhere around the house or being embedded into the vinyl.
Alternatively, you can vacuum or use a microfibre dust mop. Avoid using abrasive materials and brushes as this can damage the vinyl.
Spills should never be left to dry. Things like sugary drinks can be much harder to remove once dried, even water can cause damage to the flooring if it’s left for too long. Cleaning up spills right away will keep your vinyl flooring looking good as new for longer and save you in the long run.
For dirt and grime that is a little harder to remove, create a mild vinegar and warm water solution. To avoid drenching your vinyl flooring with a tsunami of water, we recommend putting the solution into a spray bottle and applying a mist.
We recommend using a pH-neutral cleaner diluted in water. Avoid any cleaners that contain bleach, washing liquid or general cleaning products, unless it has been specified on the bottle that it is suitable for LVT. Using incorrect cleaners can damage the vinyl, causing discoloration and deterioration of the protective wear layer.
We recommend giving your luxury vinyl a deep clean every 6 months or so to strip away any built-up dirt and grime or soapy residue from the previous cleanse. This will help restore the beautiful look of your LVT and bring back that brand new sheen.
Clean Vinyl Flooring with Natural Cleaners In Your Pantry
To deep clean your vinyl floor, mix a gallon of water with a cup of apple cider vinegar. (White vinegar is a fine substitute.) Add a drop of dish soap for extra cleaning power.
Ideally, you’ll fill a second bucket with clean, hot water to rinse the dirt off your mop as you work (rather than returning it to the floor). Wring your mop well, then soak it in the vinegar solution and wring again.
Vinyl Flooring Discoloration: A baking soda-water paste combats discoloration from dark liquids like wine or grape juice.
Vinyl Flooring Scuffs: Apply a small amount of WD-40 or jojoba oil to scuffs, and scrub with a soft-bristle brush to erase.
Vinyl Flooring Shine: Boost shine by adding a drop of baby oil to your cleaning solution.
Place down floor mats in front of doors in high traffic areas to help prevent dirt and dust from being tracked around the house.
Fit heavy furniture and appliances with floor protectors (can be found at any hardware store) will help prevent them leaving a dent behind. Pro-tip: If you have any off-cut pieces of vinyl, these will do wonders underneath furniture including chairs, tables, fridges and so on.
Avoid using a vacuum with a beater bar as it can scratch and damage your LVT.
Avoid dragging heavy furniture as this can tear the vinyl. Always lift heavy furniture off the ground before moving.
Avoid steam cleaners at all costs. Steam cleaners force moisture into the seams and break down the adhesive holding the vinyl down. This will cause your vinyl flooring to become loose and lift.
Vinyl exposed to direct sunlight for long periods of time will cause it to fade. Keep the curtains and blinds closed if no one is occupying the room. However, there is now fade-resistant LVT thanks to modern advancements in technology.
To reduce the amount of dirt brought into your home, take off your shoes before entering your home.
The best way to remove scuff marks is to apply a splash of jojoba oil onto a soft cloth and give it a good rub.
As much as it sounds like a chore, it’s extremely easy to do and highly beneficial in prolonging the lifespan of your vinyl and maintaining its good looks. This way you avoid dirt and dust accumulating and being tracked everywhere around the house or being embedded into the vinyl.
Alternatively, you can vacuum or use a microfibre dust mop. Avoid using abrasive materials and brushes as this can damage the vinyl.
Spills should never be left to dry. Things like sugary drinks can be much harder to remove once dried, even water can cause damage to the flooring if it’s left for too long. Cleaning up spills right away will keep your vinyl flooring looking good as new for longer and save you in the long run.
For dirt and grime that is a little harder to remove, create a mild vinegar and warm water solution. To avoid drenching your vinyl flooring with a tsunami of water, we recommend putting the solution into a spray bottle and applying a mist.
We recommend using a pH-neutral cleaner diluted in water. Avoid any cleaners that contain bleach, washing liquid or general cleaning products, unless it has been specified on the bottle that it is suitable for LVT. Using incorrect cleaners can damage the vinyl, causing discoloration and deterioration of the protective wear layer.
We recommend giving your luxury vinyl a deep clean every 6 months or so to strip away any built-up dirt and grime or soapy residue from the previous cleanse. This will help restore the beautiful look of your LVT and bring back that brand new sheen.
Clean Vinyl Flooring with Natural Cleaners In Your Pantry
To deep clean your vinyl floor, mix a gallon of water with a cup of apple cider vinegar. (White vinegar is a fine substitute.) Add a drop of dish soap for extra cleaning power.
Ideally, you’ll fill a second bucket with clean, hot water to rinse the dirt off your mop as you work (rather than returning it to the floor). Wring your mop well, then soak it in the vinegar solution and wring again.
Vinyl Flooring Discoloration: A baking soda-water paste combats discoloration from dark liquids like wine or grape juice.
Vinyl Flooring Scuffs: Apply a small amount of WD-40 or jojoba oil to scuffs, and scrub with a soft-bristle brush to erase.
Vinyl Flooring Shine: Boost shine by adding a drop of baby oil to your cleaning solution.
Place down floor mats in front of doors in high traffic areas to help prevent dirt and dust from being tracked around the house.
Fit heavy furniture and appliances with floor protectors (can be found at any hardware store) will help prevent them leaving a dent behind. Pro-tip: If you have any off-cut pieces of vinyl, these will do wonders underneath furniture including chairs, tables, fridges and so on.
Avoid using a vacuum with a beater bar as it can scratch and damage your LVT.
Avoid dragging heavy furniture as this can tear the vinyl. Always lift heavy furniture off the ground before moving.
Avoid steam cleaners at all costs. Steam cleaners force moisture into the seams and break down the adhesive holding the vinyl down. This will cause your vinyl flooring to become loose and lift.
Vinyl exposed to direct sunlight for long periods of time will cause it to fade. Keep the curtains and blinds closed if no one is occupying the room. However, there is now fade-resistant LVT thanks to modern advancements in technology.
To reduce the amount of dirt brought into your home, take off your shoes before entering your home.
The best way to remove scuff marks is to apply a splash of jojoba oil onto a soft cloth and give it a good rub.
FREQUENTLY ASKED QUESTION
This is where you should answer the most common questions prospective customers might have.
Luxury vinyl (also referred to as luxury vinyl tile (LVT) and luxury vinyl plank (LVP), is a type of premium flooring. We describe products as luxury vinyl because they showcase premium visuals, warranties and installation options that cannot be found in our standard peel-and-stick vinyl tiles.
Our Oneplus & Lite rigid core flooring collection is all 100% waterproof, so planks and tiles won’t swell, buckle or lose integrity when exposed to water. This makes them perfect for any room, including kitchens, bathrooms, laundry rooms, mudrooms and basements.
PermShield rigid core flooring can be installed on all levels of the home and over most subfloors.
Vinyl flooring installation typically takes between 1-2 days to complete.
The area rugs and pads can help protect your PermShield Luxury Vinyl Flooring by keeping heavy objects and furniture from sliding or slipping and causing permanent damages.
Rugs that are safe for PermShield vinyl flooring include rugs with backing made from natural fiber such as cotton-backed area rugs, jute backing (although for these you will need a rug pad because it can be scratchy) and handwoven rugs without any kind of backing.